ROTATORY DRILL KIT FOR JEWELRY

The rotatory drill kit is a tool with a small motor, which is used to sand, polish and cut certain materials. It is usually used on materials such as stone, ceramics, metal, wood, brick and granite.

TECHNICAL SPECIFICATIONS:

-10000 revolutions per minute.
-Volts: 3.6
-Charging time 6 hours

CONTENT:

Main rotary unit of the tool with its rechargeable battery.
-3 pieces of brass necklaces 2’3mm, 3mm, 3’2mm.

ACCESSORIES:

<20 pcs burr-type diamond grinder - 2.3mm cane -10 pcs stone mounted set- 2'3mm reed.
-6 pcs of sanding battery.
-4 pcs cutting wheel system
-5 pcs of wheel battery
-2 pcs polishing wheel system
-3 pcs wheel wiring system
-1 pcs stone grinder
-3 pcs of drills different sizes
-2 pcs connector posts
-1 pcs drill bit engraved on the metal

How to change the accessories:

The uses that from Vinda we want to show you are very varied: there is an infinity of metallic bases that come without a pass and if you want to use it as a pendant you would need to make a small drill with a very small bit; you can sand or polish stones, ceramic beads, glass…etc that you have with small defects or even if you want to give it shine.